Division Chapter residual rule:
Where the country of origin cannot be determined by application of the primary rules, the country of origin of the goods shall be the country in which the major portion of the materials originated, as determined on the basis of the value of the materials.
| F1HS 2017 Code | Description of goods | Primary rules |
|---|---|---|
| 7201 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. | CTH |
| 7202 | Ferro-alloys. | CTH |
| 7203 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms. | CTH |
| 7204 | Ferrous waste and scrap; re-melting scrap ingots of iron or steel. | As specified for split headings |
| ex 7204 (a) | - Ferrous waste and scrap | The origin of the goods of this split heading shall be the country where they were derived from manufacturing or processing operations or from consumption |
| ex 7204 (b) | - Re-melting scrap ingots of iron or steel | The origin of the goods of this split heading shall be the country where the waste and scrap used to obtain them were derived from manufacturing or processing operations or from consumption |
| 7205 | Granules and powders, of pig iron, spiegeleisen, iron or steel. | As specified for subheadings |
| 7205 10 | - Granules | CTH |
| - Powders: | ||
| 7205 21 | - - Of alloy steel | As specified for split subheadings |
| ex 7205 21 (a) | - - - Mixed powders of alloy steel | CTSH or CTSHS provided recasting or atomizing of the cast alloy |
| ex 7205 21 (b) | - - - Unmixed powders of alloy steel | CTSH |
| 7205 29 | - - Other | As specified for split subheadings |
| ex 7205 29 (a) | - - - Other mixed powders | CTSH or CTSHS provided recasting or atomizing of the cast alloy |
| ex 7205 29 (b) | - - - Other unmixed powders | CTSH |
| 7206 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203). | CTH |
| 7207 | Semi-finished products of iron or non-alloy steel. | CTH, except from heading 7206 |
| 7208 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. | CTH |
| 7209 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. | CTH |
| 7210 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. | As specified for split headings |
| ex 7210 (a) | - Clad | CTHS |
| ex 7210 (b) | - Plated or coated with tin, and printed or lacquered | CTH |
| ex 7210 (c) | - Plated or coated with zinc, and corrugated | CTH |
| ex 7210 (d) | - Other | CTH |
| 7211 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. | As specified for split headings |
| ex 7211 (a) | - Hot-rolled | CTH, except from heading 7208 |
| ex 7211 (b) | - Cold-rolled (cold-reduced) | CTHS, except from heading 7209 |
| 7212 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. | As specified for split headings |
| ex 7212 (a) | - Clad | CTHS, except from heading 7210 |
| ex 7212 (b) | - Other | CTH, except from heading 7210 |
| 7213 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. | CTH, except from heading 7214 |
| 7214 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. | CTH, except from heading 7213 |
| 7215 | Other bars and rods of iron or non-alloy steel. | CTH |
| 7216 | Angles, shapes and sections of iron or non-alloy steel. | As specified for split headings |
| ex 7216 (a) | - Not further worked than hot-rolled | CTH, except from heading 7208, 7209, 7210, 7211 or 7212, and except from heading 7213, 7214 or 7215 when this change results from cutting or bending. |
| ex 7216 (b) | - Not further worked than cold-rolled | CTH, except from heading 7209 or split heading ex 7211 (b), and except from heading 7215 when this change results from cutting or bending. |
| ex 7216 (c) | - Clad | CTHS |
| ex 7216 (d) | - Other | CTH, except from headings 7208 to 7215 |
| 7217 | Wire of iron or non-alloy steel. | CTH, except from headings 7213 to 7215; or change from headings 7213 to 7215, provided the material has been cold-formed. |
| 7218 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. | CTH |
| 7219 | Flat-rolled products of stainless steel, of a width of 600 mm or more. | As specified for split headings |
| ex 7219 (a) | - Not further worked than hot-rolled | CTH |
| ex 7219 (b) | - Not further worked than cold-rolled | CTHS |
| ex 7219 (c) | - Clad | CTHS |
| ex 7219 (d) | - Other | CTHS |
| 7220 | Flat-rolled products of stainless steel, of a width of less than 600 mm. | As specified for split headings |
| ex 7220 (a) | - Not further worked than hot-rolled | CTH, except from 7219 |
| ex 7220 (b) | - Not further worked than cold rolled | CTHS |
| ex 7220 (c) | - Clad | CTHS |
| ex 7220 (d) | - Other | CTHS |
| 7221 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. | CTH, except from heading 7222 |
| 7222 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. | As specified for split headings |
| ex 7222 (a) | - Bars and rods, not further worked than hot-rolled | CTH, except from heading 7221 |
| ex 7222 (b) | - Angles, shapes and sections, not further worked than hot-rolled | CTH, except from heading 7219 or 7220 and except from heading 7221 or split heading ex 7222 (a) when this change results from cutting or bending. |
| ex 7222 (c) | - Bars and rods, angles, shapes and sections, not further worked than cold-rolled | CTH, except from split heading ex 7219 (b) or ex 7220 (b); or CTHS from split heading ex 7222 (a) |
| ex 7222 (d) | - Bars and rods, angles, shapes and sections, clad | CTHS |
| ex 7222 (e) | - Other bars and rods | CTH, except from heading 7221 |
| ex 7222 (f) | - Other angles, shape and sections | CTHS |
| 7223 | Wire of stainless steel. | CTH, except from 7221 to 7222; or change from headings 7221 to 7222, provided the material has been cold-formed. |
| 7224 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. | CTH |
| 7225 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. | As specified for split headings |
| ex 7225 (a) | - Not further worked than hot-rolled | CTH |
| ex 7225 (b) | - Not further worked than cold-rolled | CTHS |
| ex 7225 (c) | - Clad | CTHS |
| ex 7225 (d) | - Other | CTH |
| 7226 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. | As specified for split headings |
| ex 7226 (a) | - Not further worked than hot-rolled | CTH, except from heading 7225 |
| ex 7226 (b) | - Not further worked than cold-rolled | CTHS, except from cold-rolled products of heading 7225 |
| ex 7226 (c) | - Clad | CTHS |
| ex 7226 (d) | - Other | CTHS, except from the same subheading |
| 7227 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. | CTH, except from heading 7228 |
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. | As specified for split headings |
| ex 7228 (a) | - Bars and rods, not further worked than hot-rolled | CTH, except from heading 7227 |
| ex 7228 (b) | - Angles, shapes and sections, not further worked than hot-rolled | CTH, except from heading 7225 or 7226, and except from heading 7227 or split heading ex 7228 (a) when this change results from cutting or bending. |
| ex 7228 (c) | - Bars and rods, angles, shapes and sections not further worked than cold-rolled | CTH, except from split heading ex 7225 (b) or ex 7226 (b) or CTHS from split heading ex 7228 (a) |
| ex 7228 (d) | - Bars and rods, angles, shapes and sections, clad | CTHS |
| ex 7228 (e) | - Other bars and rods | CTHS |
| ex 7228 (f) | - Other angles, shapes and sections | CTHS |
| 7229 | Wire of other alloy steel. | CTH, except from headings 7227 to 7228; or change from headings 7227 to 7228, provided the material has been cold-formed. |